Can be integrated into an existing Smart Grid system and operate in different communication environments.

Smart Navigator LM Overhead Faulted Circuit Indicator
The Smart Navigator LM Faulted Circuit Indicator is designed
and engineered for overhead Smart Grid Distribution
Automation applications. The Smart Navigator LM is installed
on overhead distribution circuits up to 46kV and transmits event
based fault status information in addition to continuous circuit
data.
The Smart Navigator LM FCI can be integrated into an existing
Smart Grid system and operate in different communication
environments such as cellular, SCADA or radio. The PDP DNP
Receiver, which can be mounted on a pole or within other
SCADA equipment (e.g. motor operated switches or RTUs),
collects and manages all Smart Navigator LM data as an access
point into a communication environment.
Automatic Load Leveling with Load Memory enables the unit to
automatically set its fault trip threshold in relation to peak load
current. When fault current exceeds trip rating, the Smart
Navigator LM FCI sends a signal to the DNP Receiver or Smart
Controller for near real time status reporting.
In addition to identifying fault status through the communication
network, local indication is provided by a blinking bright red
LED. Several combinations of reset methods are available
including current, time, and manual. In addition to event based
fault identification, the Smart Navigator LM FCI also can
communicate fault data, load current, and status data.
Event Based Reports:
 Fault Detection
 Momentary Versus Permanent
 Fault Current Magnitude (Amps RMS)
 Last Known Load Current
 Fault Duration (msec.)
 Time Stamp
Continuous Reports:
 Routine Call and Health Check
 Battery Status
 Average Load Current
 Peak Load Current
 Minimum Load Current
 Ambient Temperature
Smart Navigator LM
Overhead Faulted Circuit Indicator
1504-CAT-43-10X6
2658 Holcomb Bridge Rd. Suite 100 Alpharetta, GA 30022
Phone: 770-587-9044 Fax: 770-587-4497
www.powerdeliveryproducts.com
Meets or Exceeds ANSI/IEEE 495-2007
ISO 9001 Certified Factory
Smart Navigator LM
Overhead Faulted Circuit Indicator
1504-CAT-43-10X6
2658 Holcomb Bridge Rd. Suite 100 Alpharetta, GA 30022
Phone: 770-587-9044 Fax: 770-587-4497
www.powerdeliveryproducts.com
Catalog Number Selection
43 10 Trip Rating
(X)
6 Reset Option
(X)
00
Smart
Navigator
FCI
Standard:
Smart Navigator LM
Faraday Cage
Load Memory
Select One
0 = 50A Minimum Trip
1 = 100A Minimum Trip
2 = 200A Minimum Trip
9 = Fixed Trip (Specify Trip Rating)
Cable Diameter of
0.3″ to 1.25″
Select One
1 = Current + Time + Manual Reset
2 = Time + Manual Reset
Technical Specifications
Standards Meets or exceeds ANSI/IEEE Std. 495-2007
Minimum Trip Current 50 A, 100 A, or 200 A Minimum Trip @ 200 msec.
Load Tracking Initiation 25 A for 100A Minimum Trip Unit
Load Memory for Self Adjustment 72 Hours
Current Reset ≥ 3 Amps Load Current
Auto Reset Time 4 Hours
Maximum Operating Voltage 46 kV L-L
Accuracy +10% @ 20 Degrees C
Current Withstand 25,000 Amps Sym. RMS / 170 msec.
Power Source 4 Lithium Oxide Cells, Replaceable, 15 year Operating Life
Indication 1 Bright Red LED / 1 Bright Yellow LED
Total Indicating Time > 1200 Hours
Flashing Frequency 30 per minute for Fault Indication, 6 per minute for Low Battery
Temperature Range -40 to +85 Degrees C
Adjacent Cable Immunity 10 inches @ 10kA
Cable Diameter Range 0.3 inches to 1.25 inches
Casing Material UV Stable Fiber Reinforced Polymer
Current Transformer Closed Core Ferrous Stainless Steel
Weight 15 oz.
RF Frequency/ Power/ Modulation 2.4 Ghz / 1 mw. / 2-FSK
RF Transmit Range 100 Feet Line of Sight
Data Reporting Cycle 15 Minutes
0 Comments

Leave a reply

We’re Here to Help

Please enter your question below—or call us toll-free at 866-483-7289. To make sure we get your request or information to the right person, please include the nature of your issue or concern. If you’d like us to contact you, we’ll make every attempt to reach you within two business days.

Sending

Log in with your credentials

Forgot your details?