Course Length (Days)
Registration Contact email
|CCP250||Logix5000 Programmer Certificate||4||8/16/2019||8/19/2019||Albuquerque, NMemail@example.com||(480) 489-3666|
ControlLogix/Studio 5000 Logix Designer
Accelerated Logix5000 Programmer Certificate Level 1
Photo, screen capture or image
• Understanding Control Systems
• Locating ControlLogix System Components
• Identifying and Connecting to Industrial Networks
• Creating a Studio 5000 Logix Designer Project
• Downloading, Uploading, and Going Online
• Configuring Modules in a Studio 5000 Logix
• Creating Tags and Monitoring Data
• Drafting Basic Ladder Logic
• Programming Bitwise Instructions
• Testing a Ladder Diagram
• Programming Timer and Counter Instructions
• Programming Comparison, Math, and Move
• Integrated Practice: Programming a Basic
Application in Studio 5000 Logix Designer Software
• Creating a User-Defined Data Type
• Creating and Using Arrays
• Creating Add-On Instructions
• Searching Within and Managing Files
• Configuring a Logix5000 Controller to Produce and
• Configuring a Logix5000 Message
• Retrieving and Setting Controller Status Values
• Leveraging Studio 5000 Logix Designer Tools
• Identifying and Correcting Faults in a Logix5000
This accelerated course is for individuals who can quickly learn and apply
Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix
Designer® programming environment.
You will quickly move from these early concepts to using producer/
consumer technology and messages to multicast input and output
devices, share data between controllers, and control remote I/O.
This course prepares you for the Accelerated Logix5000 Programmer
Certificate Course Level 1 certificate exam, which is included in the course
Upon completion of this course, given a functional specification for a
Logix5000 application, you should be able to develop a project to meet the
This course covers tasks common to the following hardware, which use the
Logix5000 control engine, or operating system:
• ControlLogix® controllers
• CompactLogix™ controllers
These tasks include creating a new project, programming an application,
and adding advanced functionality (e.g. data arrays, add-on instructions,
produced/consumed data, and messages) to the application.
Publication GMST-PP734A-EN-E –October
2017 Copyright ©2017 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Allen-Bradley, CompactLogix, ControlLogix, LISTEN. THINK. SOLVE., Logix5000, Rockwell Software and Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Who Should Attend
Ideal course attendees are those who:
• Are responsible for programming Logix5000 controllers
using the Studio 5000 Logix Designer application
• Need to learn how to draft ladder logic for any application
Curriculum Note: Along with new material and labs, this
course contains lessons from courses CCP146, CCP151, and
CCP143 – in an accelerated five-day format. Do not take all
three courses in addition to this one.
To successfully complete this course, the following
prerequisites are required:
• Completion of at least one Rockwell Automation
Logix5000 course in the last two years (course completed
on or after 3/31/2016).
• Pursuing a Logix5000 Certificate for Programmers.
All technology is provided for student use in the classroom
by Rockwell Automation. It is not necessary for students to
bring any technology with them when attending this course.
To enhance and facilitate the students’ learning experiences,
the following materials are provided as part of the
• Student Manual
– Includes the key concepts, definitions, examples, and
activities presented in this course
• Lab Book
– Provides learning activities and hands-on practice.
Solutions are included after each exercise for
• Studio 5000 Logix Designer and Logix5000 Procedures Guide
– Provides the steps required to complete basic software
tasks common to all Logix5000 controllers. By following
the procedures in this job aid, you can immediately
apply what you learn to your own work.
Access to the certificate assessment is valid for 90 days from
end of class and will be provided by email.
Throughout this course, you will have the opportunity
to practice the skills you have learned through a variety
of hands-on exercises. These exercises focus on the skills
introduced in each lesson.
Next Learning Level
Once you have an understanding of the topics and skills
covered in this course, you may want to attend specific
Studio 5000 Logix Designer training such as:
• Studio 5000 Logix Designer Level 4: Function Block
Programming (Course No. CCP152)
• Studio 5000 Logix Designer Level 4: Structured Text /
Sequential Function Chart Programming
(Course No. CCP154)
This is a five-day course.
CEUs Awarded: 3.5