Course Code
Course Title
Course Length (Days)
Start Date
End Date
Location
Registration Contact email
Registration Phone
CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2 10/18/2018 10/19/2018 Rapid City, SD MMcVicker@borderstates.com (308) 382-2230
CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2 10/25/2018 10/26/2018 Dickinson, ND jwinter@borderstates.com (701) 630-2905
CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2 11/1/2018 11/2/2018 Albuquerque, NM wweppler@borderstates.com (480) 489-3666
CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2 11/29/2018 11/30/2018 Fargo, ND jwinter@borderstates.com (701) 630-2905
CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2 1/29/2019 1/30/2019 El Paso, Texas wweppler@borderstates.com (480) 489-3666
CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2 2/7/2019 2/8/2019 Phoenix, AZ wweppler@borderstates.com (480) 489-3666
CCP151
ControlLogix/Studio 5000
Studio 5000 Logix Designer Level 2:
Basic Ladder Logic Programming Course Description
Photo, screen capture or image
Course Number
CCP151
Course Purpose
After completing this course, you should be able to program basic
ladder logic instructions for Logix5000™ controllers. This is a skill-building
course that provides you with the resources and hands-on practice
required to complete this objective.
You will have an opportunity to use the Studio 5000 Logix Designer®
application to perform basic software tasks to meet the requirements of
a given functional specification. In addition, you will set up a sequencer
to run equipment through a predefined procedure and separate
production procedure from equipment control.
Course Agenda
Day 1
• Starting a Ladder Diagram for a
Studio 5000 Logix Designer Project
• Testing a Ladder Diagram in a
Studio 5000 Logix Designer Project
• Programming Timer Instructions in a
Studio 5000 Logix Designer Project
• Programming Compare Instructions
in a Studio 5000 Logix Designer Project
• Programming Move Instructions in a
Studio 5000 Logix Designer Project
• Programming Math Instructions in a
Studio 5000 Logix Designer Project
Day 2
• Programming Counter Instructions in a
Studio 5000 Logix Designer Project
• Handling Expressions in a
Studio 5000 Logix Designer Project
• Documenting and Searching Ladder
Logic Using the Studio 5000 Logix
Designer Application
• Programming a Procedure in a
Studio 5000 Logix Designer Project
• Separating the Procedure from
Equipment Control in Studio 5000
Logix Designer Project
• Copying and Filling an Array in a
Studio 5000 Logix Designer Project
Publication GMST10-PP189I-EN-E – September 2016 Copyright ©2016 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Supersedes Publication GMST10-PP189H-EN-E – August 2016
Allen-Bradley, ControlLogix, LISTEN. THINK. SOLVE., Logix5000, Rockwell Software, and Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Who Should Attend
Programmers that have little or no working experience with
controllers, are responsible for programming Logix5000
controllers using the Logix Designer application, and need
to learn how to draft ladder logic for any application should
attend this course.
Prerequisites
To successfully complete this course, completion of the
Studio 5000 Logix Designer Level 1: ControlLogix System
Fundamentals course (Course No. CCP146) or equivalent
experience is required.
Technology Requirements
All technology is provided for student use in the classroom by
Rockwell Automation. It is not necessary for students to bring
any technology with them when attending this course.
Student Materials
To enhance and facilitate the students’ learning experiences, the
following materials are provided as part of the course package:
• Student Manual
– Includes the key concepts, definitions, examples,
and activities presented in this course
• Lab Book
– Provides learning activities and hands-on practice. Solutions
are included after each exercise for immediate feedback.
• Studio 5000 Logix Designer and Logix5000 Procedures Guide
– Provides the steps required to complete basic software
tasks that are common to all Logix5000 hardware platforms.
Hands-On Practice
Throughout this course, you will have the opportunity to
practice the skills you have learned through a variety of
hands-on exercises. Exercises focus on the skills
introduced in each lesson and are performed on a
ControlLogix® workstation.
Next Learning Level
Once you have an understanding of the topics and skills
covered in this course, you may be want to attend one or
more of the following courses:
• Studio 5000 Logix Designer Level 3: Project Development
(Course No. CCP143)
• DeviceNet and RSNetWorx Configuration and
Troubleshooting (Course No. CCP164)
• ControlNet and RSNetWorx Configuration and
Troubleshooting (Course No. CCP173)
Course Length
This is a two-day course.
IACET CEUs
CEUs Awarded: 1.4
To Register
To register for this or any other Rockwell Automation
training course, contact your local authorized Allen-Bradley®
Distributor or your local Sales/Support office for a complete
listing of courses, descriptions, prices, and schedules.
You can also access course information via the Web at
http://www.rockwellautomation.com/training

We’re Here to Help

Please enter your question below—or call us toll-free at 866-483-7289. To make sure we get your request or information to the right person, please include the nature of your issue or concern. If you’d like us to contact you, we’ll make every attempt to reach you within two business days.

Sending

Log in with your credentials

Forgot your details?