Course Code
Course Title
Course Length (Days)
Start Date
End Date
Location
Registration Contact email
Registration Phone
CCP143 Studio 5000 Logix Designer Level 3: Project Development 4 10/9/2018 10/12/2018 Sioux Falls, SD jwinter@borderstates.com (701) 630-2905
CCP143 Studio 5000 Logix Designer Level 3: Project Development 4 12/11/2018 12/14/2018 Farmington, NM wweppler@borderstates.com (480) 489-3666
CCP143 Studio 5000 Logix Designer Level 3: Project Development 4 2/12/2019 2/15/2019 El Paso, Texas wweppler@borderstates.com (480) 489-3666
CCP143 Studio 5000 Logix Designer Level 3: Project Development 4 12/29/2019 1/1/2020 Phoenix, AZ wweppler@borderstates.com (480) 489-3666
CCP143
ControlLogix/Studio 5000
Studio 5000 Logix Designer Level 3: Project Development
Course Description
Course Number
CCP143
Course Purpose
Upon completion of this course, given a functional specification for
a Logix5000™ application, you should be able to develop a project to
meet the specification requirements.
This course covers tasks common to the following hardware, which all
use the Logix5000 control engine:
• ControlLogix® controllers
• CompactLogix™ controllers
• SoftLogix™ controllers
This course builds upon your knowledge of common controller
terms and operation and your experience with basic ladder logic
programming.
You can gain a deeper understanding of project development tasks that
are common to all Logix5000 controllers. Such tasks include organizing
tasks and routines, organizing controller data, configuring modules, and
sharing data.
You will also use producer/consumer technology for multicasting
to input and output devices, sharing data between controllers, and
controlling remote I/O.
Course Agenda
Day 1
• Creating and Organizing a Project
• Creating a Periodic Task
• Creating an Event Task
• Developing an Add-On Instruction
in a Ladder Diagram
Day 2
• Organizing Arrays
• Creating a User-Defined Data Type
• Importing Components
• Entering, Editing, and Verifying
Ladder Logic
• Configuring a Controller to Produce
and Consume Data
• Configuring a Logix5000 Message
Day 3
• Configuring Controllers and Modules to
Communicate and Share Data over
EtherNet/IP
• Communicating with a Local 1756-I/O
Module
• Allocating Connections
• Retrieving and Setting Controller Status
Values with GSV/SSV Instructions
• Programming a BTD Instruction
• Handling a Major Fault
Day 4
• Managing Project Files
• Updating Logix5000 Firmware
• Integrated Practice: Developing a
Studio 5000 Logix Designer Project
Publication GMST10-PP184G-EN-E – September 2016 Copyright ©2016 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Supersedes Publication GMST10-PP184F-EN-E – August 2016
Allen-Bradley, CompactLogix, ControlLogix, LISTEN. THINK. SOLVE., Logix5000, Rockwell Software, SoftLogix, and Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Who Should Attend
Individuals who need to develop Studio 5000 Logix Designer®
projects for any Logix5000 controller should attend this course.
Prerequisites
To successfully complete this course, the following
prerequisites are required:
• Ability to perform basic Microsoft Windows tasks
• Knowledge of common controller terms and operation
through experience or one of the following courses:
– Studio 5000 Logix Designer Level 1: ControlLogix System
Fundamentals (Course No. CCP146)
– RSTrainer for ControlLogix Fundamentals computer-based
training (9393-RSTCLX)
• Ability to write basic ladder logic with common instructions,
such as bit, timer, counter, move, and comparison
instructions through experience or this course:
– Studio 5000 Logix Designer Level 2: Basic Ladder Logic
Programming (Course No. CCP151)
Technology Requirements
All technology is provided for student use in the classroom by
Rockwell Automation. It is not necessary for students to bring
any technology with them when attending this course.
Student Materials
To enhance and facilitate the student’s learning experience, the
following materials are provided as part of the course package:
• Student Manual:
– Includes the key concepts, definitions, examples,
and activities
• Lab Book:
– Provides learning activities and hands-on practice
• Studio 5000 Logix Designer and Logix5000 Procedures Guide:
– Provides the steps to complete basic software tasks
common to all Logix5000 controllers
• Logix5000 Controllers Design Considerations Reference Manual:
– Contains guidelines for designing a Logix5000 application
Hands-On Practice
Throughout this course, you will have the opportunity to
practice the skills you have learned through a variety of
hands-on exercises. Exercises focus on the skills introduced
in each lesson.
Next Learning Level
Once you have an understanding of the topics and the skills
covered in this course, you may want to attend specific
programming training such as:
• Studio 5000 Logix Designer Level 4: Function Block
Programming (Course No. CCP152)
• Studio 5000 Logix Designer Level 4: Kinetix 6000 (SERCOS)
Programming (Course No. CCN145)
• Studio 5000 Logix Designer Level 4: Kinetix 6500 (CIP)
Programming (Course No. CCN144)
Course Length
This is a four-day course.
IACET CEUs
CEUs Awarded: 2.8
To Register
To register for this or any other Rockwell Automation
training course, contact your local authorized Allen-Bradley®
Distributor or your local Sales/Support office for a complete
listing of courses, descriptions, prices, and schedules.
You can also access course information via the Web at
http://www.rockwellautomation.com/training

We’re Here to Help

Please enter your question below—or call us toll-free at 866-483-7289. To make sure we get your request or information to the right person, please include the nature of your issue or concern. If you’d like us to contact you, we’ll make every attempt to reach you within two business days.

Sending

Log in with your credentials

Forgot your details?