Course Length (Days)
Registration Contact email
|CCA182||PowerFlex 750 Series Configuration and Startup||2||7/9/2019||7/10/2019||Bismarck, NDemail@example.com||(701) 630-2905|
|CCA182||PowerFlex 750 Series Configuration and Startup||2||8/13/2019||8/14/2019||El Paso, Texasfirstname.lastname@example.org||(480) 489-3666|
|CCA182||PowerFlex 750 Series Configuration and Startup||2||10/8/2019||10/9/2019||Grand Forks, NDemail@example.com||(701) 630-2905|
Verifying PowerFlex 750-Series
Locating and Modifying PowerFlex
750-Series Drive Data Using the
Communications Adapter for a
PowerFlex 750-Series Drive
Locating and Modifying PowerFlex
750-Series Drive Data Using Drive
Starting Up a PowerFlex
Interpreting PowerFlex 750-Series
Control Block Diagrams
Controlling PowerFlex 750-Series
Creating a DeviceLogix Program in
a PowerFlex 750-Series Drive
COURSE NUMBER: CCA182
Upon completion of this course, given a wired PowerFlex 750-Series drive
(PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up
the drive and configure drive parameters to meet application needs.
Throughout the course, you will have the chance to use a variety of hardware
and software tools, including:
The A6 LCD HIM
After each demonstration, you will be given exercises that offer extensive
hands-on practice using a PowerFlex 753 or PowerFlex 755 drive.
This two-day course can be taken as a stand-alone course, or it can be taken in
conjunction with other courses in the PowerFlex 7-Class curriculum to further
broaden skills development.
PowerFlex 750-Series Configuration and Startup Course Description
GMST10-PP481F-EN-E Copyright ©2012 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Who Should Attend
This course is intended for individuals who need to
configure and start up PowerFlex 750-Series drives.
To successfully complete this course, the following
prerequisites are required:
Working knowledge of electricity, and knowledge of
electrical and industrial safety (including PPE
requirements and safe practices).
Ability to perform basic Microsoft® Windows® tasks
Completion of the AC/DC Motors and Drives
Fundamentals course (Course No. CCA101) or
Fundamentals of AC and DC Motors and Drives Webbased
training (ePass/WBT1PACK) or equivalent
All technology is provided for student use in the
classroom by Rockwell Automation. It is not necessary
for students to bring any technology with them when
attending this course.
To enhance and facilitate your learning experience, the
following materials are provided as part of the course
– Contains the topical outlines and exercises
– Used to follow presentations, take notes, and work
PowerFlex 750-Series AC Drives Documentation
– Searchable, electronic resource
– Contains frequently referenced technical
PowerFlex 750-Series AC Drives Programming
– Source of drive parameters and other key data
– Contains frequently referenced programming
Student Materials (cont.)
PowerFlex 750-Series AC Drives Installation
Throughout this course, you will have the opportunity to
practice the skills you have learned through a variety of
Exercises focus on the skills introduced in each lesson.
Exercises are performed on a PowerFlex 750-Series
Exercises are performed in class using both wired
drives and unmounted, non-functioning drives.
Next Learning Level
Once you have mastered the skills covered in this course,
you will have the knowledge and skills necessary to
attend the next level of PowerFlex 750-Series training. In
particular, this course will benefit those students enrolling
in the PowerFlex 750-Series Configuration for an
Integrated Architecture System course (Course No.
This is a two-day course.
The course number is CCA182.
CEUs Awarded: 1.4
To register for this or any other Rockwell Automation
training course, contact your local authorized AllenBradley
Distributor or your local Sales/Support office for
a complete listing of courses, descriptions, prices, and
You can also access course information via the Web at
All trademarks and registered trademarks are property of their respective